Specifications
|
5 Year Warranty |
|
Approvals: |
|
Single Output |
|
Item Number |
Output Voltage |
Output Current |
Total Regulation |
Max. Output Power |
Typ. Efficiency |
Typ. No Load Consumption |
|||||
|
Vo1 |
FAN output |
Vo1 |
FAN output |
Max1 |
Max2 |
||||||
|
Max1 |
Max2 |
Max1 |
Max2 |
||||||||
|
SMFA500-S05 (P) |
12.0 VDC |
12.0 VDC |
19.69 A |
41.67 A |
0.1 A |
0.3 A |
±3% |
240W |
508.6W |
90% |
1W |
|
SMFA500-S06 (P) |
15.0 VDC |
12.0 VDC |
15.75 A |
33.33 A |
0.1 A |
0.3 A |
±3% |
240W |
508.6W |
90% |
1W |
|
SMFA500-S07 (P) |
19.0 VDC |
12.0 VDC |
12.44 A |
26.31 A |
0.1 A |
0.3 A |
±3% |
240W |
508.6W |
90% |
1W |
|
SMFA500-S08 (P) |
24.0 VDC |
12.0 VDC |
9.85 A |
20.83 A |
0.1 A |
0.3 A |
±3% |
240W |
508.6W |
91% |
1W |
|
SMFA500-S09 (P) |
30.0 VDC |
12.0 VDC |
7.88 A |
16.66 A |
0.1 A |
0.3 A |
±3% |
240W |
508.6W |
91% |
1W |
|
SMFA500-S10 (P) |
36.0 VDC |
12.0 VDC |
6.56 A |
13.88 A |
0.1 A |
0.3 A |
±3% |
240W |
508.6W |
92% |
1W |
|
SMFA500-S11 (P) |
48.0 VDC |
12.0 VDC |
4.92 A |
10.41 A |
0.1 A |
0.3 A |
±2% |
240W |
508.6W |
92% |
1W |
*Max1:Air convection
Max2:With 25 CFM Forced Air
*"P" means with standby output : (This email address is being protected from spambots. You need JavaScript enabled to view it.) Air convection ; (5V@1A) Forced Air
|
Electrical Characteristics |
|
Condition |
Min. |
Typ. |
Max. |
Unit |
|
|
Safety Approval Input Voltage Range |
Safety Approval & Specification in Label |
100 |
|
240 |
VAC |
|
Input Operate Voltage Range |
Detail to see Fig.1 |
90 |
|
264 |
VAC |
|
Input Frequency |
Sine wave |
47 |
|
63 |
Hz |
|
Power Factor Correction |
|
0.95 |
|
1 |
|
|
Output Power Range |
See Rating Chart |
|
|
508.6 |
W |
|
Low Line Input Current |
Full Load, Vin=100VAC |
|
5.6 |
|
A |
|
High Line Input Current |
Full Load, Vin=240VAC |
|
2.4 |
|
A |
|
Low Line Input Inrush Current |
Full Load, 25°C, Cool start, Vin=100VAC |
|
|
60 |
A |
|
High Line Input Inrush Current |
Full Load, 25°C, Cool start, Vin=240VAC |
|
|
120 |
A |
|
Safety Ground Leakage Current |
Vin=240VAC, Fi=60Hz |
|
|
0.1 |
mA |
|
Efficiency |
Full Load, Vin=230VAC, Detail to see Rating Chart |
See Rating Chart |
|||
|
Line Regulation |
Full Load, Vin=100~120VAC or 200~240VAC |
|
|
1 |
% |
|
Over Voltage Protection |
Recovers automatically after fault condition is removed |
112 |
|
132 |
% |
|
Over Load Protection |
Recovers automatically after fault condition is removed |
110 |
|
150 |
% |
|
Time of Transient Response |
Io=Full Load to Half Load, Vin=110VAC |
|
|
4 |
ms |
|
Hold-Up Time |
Full Load, Vin=110VAC |
See Rating Chart |
|||
|
Start-up time |
Full Load, Vin=100~240VAC |
|
|
2 |
s |
|
Insulation Resistance |
|
50 |
|
|
MΩ |
|
Temperature Coefficient |
All Condition |
|
|
±0.04 |
%/°C |
|
Dielectric Withstanding Voltage (P-S) |
Primary to Secondary, limit current <10mA |
4000 |
|
|
VAC |
|
Dielectric Withstanding Voltage (P-G) |
Primary to PE, limit current <10mA |
2000 |
|
|
VAC |
|
EMC Emission |
Compliance to EN55011 (CISPR11), EN60601-1-2 (Conducted) |
B |
|
|
Class |
|
EMC Emission |
Compliance to EN55011 (CISPR11), EN60601-1-2 (Radiated) |
A |
|
|
Class |
|
Environmental |
|
Characteristic |
Condition |
Min. |
Typ. |
Max. |
Unit |
|
Operating Temperature |
Detail to see Fig.2 (Derate linearly from 100% load at 50°C to 50% load at 70°C) |
-40 |
|
70 |
°C |
|
Storage Temperature |
10 ~ 95% RH |
-40 |
|
85 |
°C |
|
Operating Humidity |
non-condensing |
0 |
|
95% |
RH |
|
Storage Humidity |
|
0 |
|
95% |
RH |
|
Electro Static Discharge |
Air Discharge, IEC61000-4-2 |
|
|
15 |
kV |
|
Electro Static Discharge |
Contact Discharge, IEC61000-4-2 |
|
|
8 |
kV |
|
Mean Time Between Failure |
Operating Temperature at 25°C, Calculated per MIL-HDBK-217F |
200k |
|
|
h |
|
Operating Altitude (Elevation) |
All condition |
|
|
5000 |
m |
|
Vibration |
10 ~ 500Hz, 10min./1cycle, 60min. each along X, Y, Z axes |
|
|
5 |
G |
|
Surge Voltage |
Line-Neutral |
|
|
1 |
kV |
|
Surge Voltage |
Line-PE & Neutral-PE |
|
|
2 |
kV |
|
Mechanical and PIN out |
|
MECHANICAL DIMENSIONS: (UNIT:mm)
|
PIN CHART
Main Output (Vo1)
P3:5V Standby power (Optional)
P4:FAN Output (12V)
P5:Power fail signal (5V)
PACKING:
|
|
Derating Curve |
|
|
|
