KLXA40JV SERIES


40W Smart LED Driver


  • NFC Programmable output current voltage
  • Constant power design, CC/CV Hybrid Output
  • DALI / Smart Timer / Line-dim / 0-10V
  • LED Module Temperature Detection
  • Constant Lumen Mode
  • Dim-to-off option
  • Surge (Diff:6kV, Common:10kV)
  • 1%-100% dimming

Specifications

 

 

5 Year Warranty

 

Approvals:  

 

ELECTRICAL SPECIFICATIONS

Part Number

Output

Working

Voltage 

Programmable Constant Voltage Region

Programmable Constant Current Region

Maximum 

Output

Power

Input Current

No Load Power

Turn on Delay

Line Regulation

Load Regulation

Ripple

&

Noise

KLXA40JV-2754

12-54V

27-54V

0.74-1.48A

40W

0.2A

(230VAC)

0.5W

0.5s

(230Vac)

±3%

 

±3%


2.0%

 

PROTECTIONS & CONDITIONS

PROTECTION

OCP/OVP

Programmable

SHORT CURRENT

Hiccup mode, recovers automatically after fault condition is removed

OVER TEMP.

Hiccup mode, recovers automatically after fault condition is removed

ENVIRONMENT

WORKING TEMP.

-40 ~ +70

WORKING HUMIDITY

20 ~ 95% RH non-condensing

STORAGE TEMP., HUMIDITY

-40 ~ +85, 10 ~ 95% RH

TEMP. COEFFICIENT

±3%

VIBRATION

10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

 

GENERAL INFORMATION

LED Driver Type

Constant  Voltage / Constant Current

Maximum Wattage

40 W

Input Voltage

90 ~ 305 VAC

Input Frequency

47 ~ 63 Hz

Total H armonic Distortion

<20%

WARRANTY

5 year limited warranty

Inrush Current

35A at 230VAC cold start +25

MTBF

200kHrs to MIL-HDBK-217 at25,GB

Protection

Overload/Overtemperature/Short circuit protection

Size:

168.4mm x 61.6mm x 39mm

 

 

CERTIFICATES & COMPLIANCE

SAFETY & EMC

SATETY STANDARDS

Meet UL8750,

EMC 

EN55015, EN61000-4-2,3,4,5,6,8,11, EN61000-3-2 Class C

 

MECHANICAL SPECIFICATION

 

ABSOLUTE MAXIMUM RATINGS

NTC+

5V

NTC-

5V

0-10V

12V

+12V

15V

 

 

PROGRAMMABLE FUNCTION (REFER TO SUPRO PC SOFEWARE)

Dimming Function

0-10V

DALI

Line-DIM

Timer Dim

Output Current Setting

 

Soft Start time

 

Constant Lumen Output Function

 

Lifetime Alert Function

 

External NTC Function

 

 

 

OVERRIDE TIMER DIMMING DEFINITION

 

Operation steps:

  1. Stay the AC power OFF more than 10s
  2. Turn on and off three times, make sure Ton1, Toff1, Ton2, Toff2, Ton3, Toff3 are all between 1s-5s.
  3. If the driver detect the three times switch successful, it will override the timer dimming function, means the driver will not  follow the timer dimming and keep 100% output at this power on period.

 

 NOTE:

If the override operation success, the lamp will flick one time (about 0.5s off) automatic after the three times switch.

The override function will invalid when you power on the driver next time. (Remember the power off time should.

 

 

 

RFID CONTROLLER

 NOTE:

Download configuration from "Supro" to the controller.

Use RFID Controller to transfer configure to the driver.

 

 

 

 

KLXA40JV - MEPOS ELECTRONICS
English Danish Dutch French German Italian Japanese Lithuanian Norwegian Portuguese Spanish Swedish

Quotation

No items in cart