3 Year Warranty

 

Approvals: 

PRODUCT NUMBER 

LTEA50-S050080

LTEA50-S120042

LTEA50-S150034

LTEA50-S240022 

LTEA50-S480011 

OUTPUT 

DC Output 

5V 

12V 

15V 

24V 

48V 

Rated Current 

8A 

4.2A 

3.4A 

2.2A 

1.12A 

Current Range      

0~8A 

0~4.2A 

0~3.4A 

0~2.2A 

0~1.12A 

Ripple and Noise    

(-25℃~70℃) Note 2 

<80mV 

<120mV 

<120mV 

<200mV 

<200 mV 

Voltage ADJ.  Range 

-5%~+10% of rated output voltage 

Voltage Accuracy  

±3.0% 

±3.0% 

±3.0% 

±3.0% 

±3.0% 

Line Regulation 

±0.5% 

±0.5% 

±0.5% 

±0.5% 

±0.5% 

Load Regulation 

±1.0% 

±1.0% 

±1.0% 

±1.0% 

±1.0% 

Set-up Time 

＜2.0S (115Vac input, Full load); ＜1.5S (230Vac input, Full load) 

Hold up Time  

＞20mS(115Vac input, Full load); ＞50mS(230Vac input, Full load) 

Temperature Coefficient 

±0.03%/℃ 

Overshoot and Undershoot 

<5.0% 

INPUT 

Voltage Range    

90Vac~264Vac，127~370Vdc 

Frequency Range 

47Hz~63Hz 

Efficiency 

( Typical) 

115Vacinput 

79% 

84% 

85% 

86% 

88% 

230Vacinput 

80% 

85% 

86% 

87% 

89% 

AC Current (max.) 

<1.5A 

Inrush Current (Typical) 

<20A@115Vac    <40A@230Vac      Cold start 

Leakage Current 

Input—output:<0.25mA     Input—PG:<0.75mA 

PROTECTION 

Over Load 

105%~150% of rated output current, constant power  

Over Voltage 

105%~150% of rated output voltage, Constant Voltage  

Short Circuit 

Long-term mode, auto recovery  

ENVIRONMENT 

Operating amb. Temp. & Hum. 

-25℃~70℃;  20%~90%RH  No condensing (refer to the derating curve) 

Storage Temp. & Hum. 

-40℃~85℃;  10%~95%RH  No condensing 

SAFETY &EMC  

Note 3 

Safety Standards 

UL60950-1 2nd Ed; IEC 60950-1:2005(2nd Ed) ;EN60950-1:2006 

Withstand Voltage 

Primary-Secondary:3.0KVac; ≤10mA .Primary-PG:1.5KVac; ≤10mA. Secondary-PG:0.5KVDC;≤10mA. 

Isolation Resistance 

≥100M ohms  

EMC Emission 

Compliance to EN55022,EN55024 ClassB 

Harmonic Current 

Compliance to EN61000-3-2,-3 

EMC Immunity 

Compliance to EN61000-4-2,3,4,5,6,8,11;EN55024,EN61000-6-2 heavy industry level 

OTHERS 

MTBF (MIL-HDBK-217F) 

More than 200,000Hrs (25℃, Full load) 

Dimension  (L*W*H) 

99×82×35mm 

Packing 

40PCS/CTN, 12.8KGS, 0.043CBM 

Cooling method 

Cooling by free air convection 

 

1. All parameters NOT specially mentioned are measured at rated input, rated load and 25℃ of ambient temperature. 
2. Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor. 

NOTE 

3. The SPS is considered a component which will be installed into final equipment. The equipment must be re-confirmed that it still meets EMC directives.  
4. MEPOS offer accessories for Din-35 rail bar. Please contact sales staff for details.