5 Year Limited Warranty

 

(Compliant with UL60950-1, EN60950-1, CSA, CE, RoHS)

Single Output

Part Number

Output Voltage

Max. Output Current

Load Regulation

Maximum

Output Power

SINA150-S05

12 VDC

12.5 A

±5%

150W

SINA150-S08

24 VDC

6.25 A

±3%

150W

SINA150-S09

30 VDC

5.00 A

±2%

150W

SINA150-S10

36 VDC

4.17 A

±2%

150W

SINA150-S11

48 VDC

3.13 A

±2%

150W

Electrical Characteristics

Parameter

Test Conditions

Min.

Typ.

Max.

Unit

Input Voltage

Operating Voltage

90

 

260

VAC

Input Frequency

 

47

 

63

Hz

Power Factor Correction

Io=Full load, Vin=90~260VAC

0.95

0.97

1.00

 

Output Power Range

Vin= 90 to 264 VA C

0

 

150

W

Input Current (Low Line)

Io=Full load, Vin=115 VAC

 

 

2.0

A

Input Current (High Line)

Io=Full load, Vin= 230 VAC

 

 

0.8

A

Low Line Inrush Current

Io=Full load, 25°C, Cool start,

Vin=115VAC

 

48

54

A

High Line Inrush Current

Io=Full load, 25°C, Cool start,

Vin=230VAC

 

58

60

A

Efficiency

Io=Full Load, Vin=230VAC

82

88

90

%

Line Regulation

Io=Full Load

 

0.5

1

%

Load Regulation

Vin=230VAC

2

 

5

%

Over Voltage Protection

 

112

 

132

%

Over Current Protection

 

110

 

150

%

Transient Response

Io=Full Load to Half Load, Vin=100VAC

 

 

4

mS

Hold-Up Time

Io=Full Load, Vin=110VAC

 

100

 

mS

Start Up Time

Io=Full Load, Vin=100VAC

0.3

1

2

S

Ripple & Noise (Peak to Peak)

Full Load, Vin=90VAC / 47uF capacitor / 20MHz

 

 

1

%

Safety Ground Leakage Current

Io= Full Load, Vin=240VAC/60Hz

 

 

0.5

mA

Temperature Coefficient

All output

-0.04

 

0.04

%/°C

Conditions

Parameter

Test Conditions

Min.

Typ.

Max.

Unit

Operating Temperature

Relative Humidity: 10 ~ 95%

-10

 

70

°C

Storage Temperature

Relative Humidity: 5 ~ 95%

-40

 

85

°C

MTBF :   Operating Temperature at 25°C, Calculated per MIL-HDBK-217F

0.1

 

 

M Hrs

De-rate linearly from 100% load at 50°C to 50% load at 70°C

Approvals and Compliance

Parameter

Test Conditions

Min.

Unit

Dielectric Withstanding Voltage for Primary to secondary

Primary to secondary

4242

VDC

Dielectric Withstanding Voltage for Primary to Ground

Primary to ground

2121

VDC

Isolation Resistance

Test Voltage = 2100VDC

50

MΩ

EMI requirements for CISPR-11

Vin=220VAC

B

CLASS

EMI requirements for FCC PART-18

Vin=110VAC

B

CLASS

Safety Certification

(Certification s will be applied upon request)

n/a

n/a

Environmental Compliance

RoHS

n/a

n/a

Safety, EMI, and EMC Compliance

Safety:

• UL and C-UL based on U.L.60950-1 and C.S.A C22.2
• EN60950 standards.
• CE declaration of conformity.
• IEC 60950 with C.B. Certificate

 

EMC/EMI:

• IEC61000-6-4, CISPR 11 Class A(150kHz to 30MHz)¡F79dB V QP, 66dB V AV(150kHz to 500kHz)¡A73dB V QP, 60dB V AV(500kHz to 5MHz)¡A73dB V QP, 60dB V AV(5MHz to 30MHz) 
•  IEC61000-6-4, CISPR 11 Class A(30MHz to 1GHz)¡F30dB V/m QP, at 30cm (30MHz to 230MHz)¡A37dB V/m QP, at 30cm(230MHz to 1GHz) 
• IEC61000-4-13  (16Hz ~ 2.4kHz) 
• IEC61000-4-16  (15Hz ~ 150kHz) 

 

Electromagnetic Immunity of Power Unit:

• EN55024. Inside the EN55024 there are the compliance to following standard.
• EN61000-3-2.EN61000-3-3.
• IEC 61000-4-2
• IEC 61000-4-3¡F140dB V /m(26MHz to 1GHz);
• IEC 61000-4-4¡F 4Kv (Power line),  2kV (Signal line)
• IEC 61000-4-5¡F 4Kv (Power line), 2Kv (Signal line) 

 

• IEC 61000-4-6¡F140dB V (150kHz to 80MHz )
• IEC 61000-4-8; (50 & 60Hz)
• IEC 61000-4-9; (50Hz to 50kHz)
• IEC 61000-4-10; (100kHz to 1MHz)
• IEC 61000-4-11.
• IEC 61000-4-11¡F (Ring Wave)¡F 4Kv (Power line),  2Kv (Signal line)