Specifications
Â
5 Year Warranty |
 |
Approvals:Â Â |
Â
Single Output |
PART NO. |
Setting Voltage Range (Factory setting, canât be adjusted) |
Output Current (Based on the output volt.) |
Maximum Output Power |
Ripple & Noise |
Total Reg. |
Typ. Efficiency |
Typ. No Load Consumption |
Hold-Up Time |
Protection Mode |
||
min |
max |
min |
max |
||||||||
(VDC) |
(VDC) |
(A) |
(A) |
(W) |
(mVp-p) |
(%) |
(%) |
(W) |
(ms) |
||
SIFA100-S01 |
3.0 |
5.0 |
10.80 |
18.00 |
54 |
50 |
±7 |
70 |
5 |
16 |
Hiccup |
SIFA100-S02 |
5.0 |
6.0 |
11.66 |
14.00 |
70 |
60 |
±5 |
74 |
5 |
16 |
Hiccup |
SIFA100-S03 |
6.0 |
9.0 |
8.88 |
13.33 |
80 |
90 |
±5 |
78 |
5 |
16 |
Hiccup |
SIFA100-S04 |
9.0 |
11.0 |
9.09 |
11.11 |
100 |
110 |
±5 |
78 |
5 |
16 |
Hiccup |
SIFA100-S05 |
11.0 |
13.0 |
7.69 |
9.09 |
100 |
130 |
±3 |
80 |
5 |
16 |
Hiccup |
SIFA100-S06 |
13.0 |
16.0 |
6.25 |
7.69 |
100 |
160 |
±3 |
80 |
5 |
16 |
Hiccup |
SIFA100-S07 |
16.0 |
21.0 |
4.76 |
6.25 |
100 |
240 |
±3 |
80 |
5 |
16 |
Hiccup |
SIFA100-S08 |
21.0 |
27.0 |
3.70 |
4.76 |
100 |
300 |
±2 |
80 |
5 |
16 |
Hiccup |
SIFA100-S09 |
27.0 |
33.0 |
3.03 |
3.70 |
100 |
300 |
±2 |
80 |
5 |
16 |
Hiccup |
SIFA100-S10 |
33.0 |
40.0 |
2.50 |
3.03 |
100 |
300 |
±2 |
80 |
5 |
16 |
Hiccup |
SIFA100-S11 |
40.0 |
50.0 |
2.00 |
2.50 |
100 |
300 |
±2 |
82 |
5 |
16 |
Hiccup |
Â
Electrical Characteristics |
Characteristic |
Condition |
Min. |
Typ. |
Max. |
Unit |
Safety Approval Input Voltage Range |
Safety Approval & Specification in Label |
100 |
 |
240 |
VAC |
Input Operate Voltage Range |
Detail to see Fig.1 |
90 |
 |
260 |
VAC |
Input Frequency |
Sine wave |
47 |
 |
63 |
Hz |
Power Factor Correction |
Io=Full load, Vin=240VAC |
0.95 |
 |
1 |
 |
Output Power Range |
See Rating Chart |
 |
 |
100 |
W |
Low Line Input Current |
Full Load, Vin=100VAC |
 |
2.0 |
 |
A |
High Line Input Current |
Full Load, Vin=240VAC |
 |
0.83 |
 |
A |
Low Line Input Inrush Current |
Full Load, 25°C, Cool start, Vin=100VAC |
 |
 |
50 |
A |
High Line Input Inrush Current |
Full Load, 25°C, Cool start, Vin=240VAC |
 |
 |
120 |
A |
Safety Ground Leakage Current |
Vin=240VAC, Fi=60Hz |
 |
 |
0.75 |
mA |
Efficiency |
Full Load, Vin=230VAC, Detail  to see Rating Chart |
See Rating Chart |
|||
Line Regulation |
Full Load, Vin=100~120VAC |
0.5 |
 |
1 |
% |
Load  Regulation |
Vin=230VAC, 10~90% Load Change at Condition |
2 |
 |
5 |
% |
Over Voltage Protection |
Over Voltage Protection |
112 |
 |
132 |
% |
Over Load Protection |
Recovers automatically after fault condition is removed |
110 |
 |
150 |
% |
Time of Transient Response |
Full Load, Vin=110VAC |
 |
 |
4 |
ms |
Hold-Up Time |
Full Load, Vin=100VAC |
See Rating Chart |
|||
Start-up time |
Full Load, Vin=100~240VAC |
 |
 |
3 |
s |
Temperature Coefficient |
Full load, Vin=100~240VAC |
 |
 |
±0.04 |
%/°C |
Dielectric Withstanding Voltage (P-S) |
Primary to Secondary |
 |
 |
4242 |
VDC |
Dielectric Withstanding Voltage (P-G) |
Primary to PE |
 |
 |
2121 |
VDC |
EMC Emission |
Compliance to EN55022 (CISPR22) |
 |
 |
B |
Class |
Â
Â
Â
Â
Short Circuit Protection |
 Auto Recovery |
Cooling |
 Free Air Convection |
Flammability Rating |
 UL94V-1 |
Protection Classes |
 Class I |
Safety |
 UL 60950-1:2nd Edition, CSA C22.2 No.60950-1-07, IEC 60950-1:2005/A2:2013, EN 60950-1:2006/A2:2013 |
Â
Environmental |
Characteristic |
Condition |
Min. |
Typ. |
Max. |
Unit |
Operating Temperature |
Detail to see Fig.2 (Derate linearly from 100% load at 50°C to 50% load at 70°C) |
-20 |
 |
70 |
°C |
Storage Temperature |
10 ~ 95% RH |
-40 |
 |
85 |
°C |
Operating Humidity |
non-condensing |
0 |
 |
95% |
RH |
Storage Humidity |
 |
0 |
 |
95% |
RH |
Electro Static Discharge |
Air Discharge, IEC61000-4-2 |
 |
 |
8 |
kV |
Electro Static Discharge |
Contact Discharge, IEC61000-4-2 |
 |
 |
4 |
kV |
Mean Time Between Failure |
Operating Temperature at 25°C, Calculated per MIL-HDBK-217F |
100k |
 |
 |
h |
Operating Altitude (Elevation) |
All condition |
 |
 |
2000 |
m |
Vibration |
10 ~ 500Hz, 10min./1cycle, 60min. each along X, Y, Z axes |
 |
 |
5 |
G |
Surge Voltage |
Line-Neutral |
 |
 |
1 |
kV |
Surge Voltage |
Line-PE & Neutral-PE |
 |
 |
2 |
kV |
Â
Mechanical Diagram and Technical Charts |
   Â
Â
Datasheet PDF
Â
Â