5 Year Warranty

 

Approvals: 

Single Output

Part Number

Output Voltage

Max. Output Current

Total Regulation

Maximum

Output Power

SILA180-S05

12 VDC

14.58 A

5%

175W

SILA180-S08

24 VDC

7.50  A

3%

180W

SILA180-S11

48 VDC

3.75 A

2%

180W

Electrical Characteristics

Parameter

Test Conditions

Min.

Typ.

Max.

Unit

Input Voltage

Operating Voltage

100

 

240

VAC

Input Frequency

 

47

 

63

Hz

Power Factor Correction

Io=Full load, Vin=90~260VAC

0.95

0.97

1.00

 

Output Power Range

Vin= 90 to 264 VA C

0

 

180

W

Input Current (Low Line)

Io=Full load, Vin=115 VAC

 

 

2.3

A

Input Current (High Line)

Io=Full load, Vin= 230 VAC

 

 

0.9

A

Low Line Inrush Current

Io=Full load, 25°C, Cool start,

Vin=115VAC

 

48

54

A

High Line Inrush Current

Io=Full load, 25°C, Cool start,

Vin=230VAC

 

100

108

A

Efficiency

Io=Full Load, Vin=230VAC

85

88

90

%

Line Regulation

Io=Full Load

 

0.5

1

%

Load Regulation

Vin=230VAC

 

3

5

%

Over Voltage Protection

 

112

 

132

%

Over Current Protection

 

110

 

150

%

Transient Response

Io=Full Load to Half Load, Vin=100VAC

 

 

4

mS

Hold-Up Time

Io=Full Load, Vin=110VAC

16

 

 

mS

Start Up Time

Io=Full Load, Vin=100VAC

0.3

1

2

S

Ripple & Noise (Peak to Peak)

Full Load, Vin=90VAC

 

0.5

1

%

Safety Ground Leakage Current

Io= Full Load, Vin=240VAC/60Hz

 

0.5

0.75

mA

Temperature Coefficient

All output

-0.04

 

0.04

%/°C

 

Conditions

Parameter

Test Conditions

Min.

Typ.

Max.

Unit

Operating Temperature

 

-20

 

70

°C

Storage Temperature

 

-40

 

85

°C

Relative Humidity

 

5

 

95

%

Operating Temperature at 25°C, Calculated per MIL-HDBK-217F

0.1

 

 

M Hrs

De-rate linearly from 100% load at 50°C to 50% load at 70°C

Approvals and Compliances

Parameter

Test Conditions

Min.

Unit

Dielectric Withstanding Voltage for Primary to secondary

Primary to secondary

4242

VDC

Dielectric Withstanding Voltage for Primary to Ground

Primary to ground

2121

VDC

Isolation Resistance

Test Voltage = 2100VDC

50

MΩ

EMI requirements for CISPR-11

Vin=220VAC

B

CLASS

EMI requirements for FCC PART-18

Vin=110VAC

B

CLASS

Safety UL/c-UL, TUV/T-mark, CE

UL 60950-1, EN 60950-1

n/a

n/a

RoHS compliant

 

n/a

n/a

Mechanical and PIN out

PIN CHART

Note:

1. Dimensions are shown in mm.
2. Weight: 486gs approx.
3. Input connector mates with Molex housing  
        09-50-3051 and Molex 2478 series crimp terminal.
4. Output connector mates with Molex housing  
        09-50-3131 and Molex 2478 series crimp